# Engineering Graphics and Design(3110013)

EGD-3110013   Polygons with its inclination to one reference plane and with two reference planes
BE | Semester1  Topic : Polygons with its inclination to one reference plane and with two reference planes

## Q2 (a) Winter-2019   A rectangle ABCD 60 mm x 40 mm, is parallel to HP with one of its sides inclined at 30° to VP and the end of the side near to VP is 15 mm in front of the VP and 30 mm above HP. Draw its projections.

Unit : Projections of Planes

## Q3 (c) Winter-2019   A regular hexagon lamina ABCDEF has a side AB in VP and its side DE 45 mm in front of the VP and inclined to HP at 30°. Draw its projections. Consider the size of the lamina as 50 mm.

Unit : Projections of Planes

## Q3 (c) Winter-2019   Draw the projections of rhombus diagonals 96 mm and 48 mm long. The smaller diagonal is parallel to both the reference planes, while the other diagonal is inclined at 30° to the HP and has one of its endpoints in the HP. Keep the center of the rhombus 56 mm in front of the VP.

Unit : Projections of Planes